|
|
Tri-Made Products, Inc., is a
progressive "high speed" metal stamping company with Water Jet cutting services
located in Dayton, Ohio. We providing custom stamped metal parts,
specializing in large and small production runs and cutting otherwise
difficult to cut parts at less cost.
| Metal
Stamping: |
- Service to composite can,
electronic, packaging, fluid power, automotive & other
industries
- Full production facility for
both manufacturing and assembly.
- Certified ISO
9001:2000
- Wide range of sizes and
materials
- Thicknesses up to .125 in most
materials (ferrous and non-ferrous)
- Single, compound and progressive
dies
- Automated or manual assembly of
parts
- Bolster plates up to 23" X
36"
|
|
Water Jet Cutting
Services:
Our Water-Jet Cutting Services are capable of cutting complex flat
parts out of most materials including: metal, plastic, glass,
ceramics and composites - to a dynamic positioning accuracy within
+ 0.003" directly from a CAD drawing or DXF file.
Water Jet cutting uniquely comes
without heat-affected zone (HAZ). No heat - means no HAZ or
distortion and often eliminates deburring and grinding. Unlike
other methods, secondary machining requirements are lower or not
required.
To see examples of our "2
Axis Water Jet Cutting", click here:
Water Jet
Examples
|
|
Tri-Made Products, Inc.
39 N. Torrence St.
Dayton, Ohio 45403
Toll-Free: 1-888-874-6233
Local: (937) 258-1004
Fax: (937) 258-1006
E-mail: dloyd@trimade.com
|
|
